AF泡沫泵都適合輸送那些介質

容積式是依靠工作容積的周期性變化來實現流體的增壓和輸送的。其中,活塞式是依靠活塞在氣缸內做往復運動而實現工作容積的周期性變化，例如往復式泵和活塞式壓縮機;隔膜式屬于液壓驅動,利用膜片來代替活塞的作用;回轉式是借助于轉子在缸內作回轉運動來實現工作容積的周期性變化，例如滑片泵和滑片壓縮機、螺桿泵和螺桿壓縮機，以及齒輪泵等。
    葉片式是依靠旋轉的工作葉輪將機械能傳遞給流體介質并轉化成流體的能頭。根據介質在葉輪內的流動方向，主要分為離心式和軸流式，如離心泵、離心壓縮機以及軸流泵和軸流壓縮機等均屬此類。
    噴射式也可認為屬于速度式，但它沒有葉輪，依靠種介質的能量來輸送另一種流體介質，如射流泵等。
    這些機器各有其特點,適用于不同的生產條件。目前常用泵和壓縮機的適用范圍可參考
圖0-3和圖0-4。

就泵來說,由于離心泵具有結構簡單、體積小、重量輕、操作平穩、流量穩定、性能參數范圍廣、易于制造、便于維修等優點,在油氣儲運工程中得到廣泛應用。在壓縮機方面，活塞壓縮機由于其能耗低、適應性強和靈活性大,目前應用仍最普遍。本書重點講述離心泵、離心壓縮機和活塞壓縮機的基本原理，對其他型式泵和壓縮機只做簡略介紹。AF泡沫泵

AF foam pumps are suitable for conveying those media.

The positive displacement type relies on the periodic change of working volume to realize the pressurization and transportation of fluid. Among them, the piston type relies on the reciprocating motion of the piston in the cylinder to realize the periodic change of the working volume, such as reciprocating pump and piston compressor; Diaphragm type belongs to hydraulic drive, which uses diaphragm to replace piston; Rotary type is to achieve the periodic change of working volume by means of rotary motion of rotor in cylinder, such as vane pump and vane compressor, screw pump and screw compressor, gear pump and so on.

Blade type is a kind of energy head that transfers mechanical energy to fluid medium and converts it into fluid by rotating impeller. According to the flow direction of the medium in the impeller, it can be divided into centrifugal type and axial-flow type, such as centrifugal pump, centrifugal compressor, axial-flow pump and axial-flow compressor.

Jet type can also be considered as speed type, but it has no impeller, relying on the energy of one medium to transport another fluid medium, such as jet pump.

Each of these machines has its own characteristics and is suitable for different production conditions. At present, the application scope of common pumps and compressors can be referred to

Figure 0-3 and figure 0-4.

As far as pumps are concerned, centrifugal pumps are widely used in oil and gas storage and transportation engineering due to their advantages of simple structure, small volume, light weight, stable operation, stable flow, wide range of performance parameters, easy manufacture and maintenance. In terms of compressor, piston compressor is still the most widely used because of its low energy consumption, strong adaptability and flexibility. This book focuses on the basic principles of centrifugal pumps, centrifugal compressors and piston compressors, and only briefly introduces other types of pumps and compressors. AF foam pump